KTR Megane 2 RS & 3 RS Recirculating Valve Blanking Plate

Brand/Manufacturer: KTR



All Megane 2 RS 225/230 & Megane 3 RS 250 models
The standard turbo on the Megane 2RS 225, 230, R26, R26.R models and Megane 3 RS 250, 265, 275 including Cup and Trophy models feature a built in recirculating valve (type of dump valve) on the compressor side of the turbo. If fitting an aftermarket dump valve it can be beneficial to remove/blank off the recirc valve using this new blanking plate. Once fitted it will allow the new aftermarket valve to operate to its full potential as well as slightly increasing the noise of your new valve. Fitting is very straight forward and can be done in around 30 minutes.

Suitable for all Megane 2RS 225, Megane 2 RS 230 / R26 / R26R, Megane 3RS 250, Megane 3 RS 265/275 Models Including Cup, Cup Pack, Cup-S, Trophy, Trophy R.

Submit a review  Reviews are shown below. Why not submit your own review?

 (10/10)  Submitted by: sean 27-Feb-2011
a bit awkward to install took me about 45mins but its worth it,u farely get the most out of ur dump valve and sounds alot louder a must by if u have an aftermaket dump valve

 (10/10)  Submitted by: Manfredas 29-Jan-2016
Fitted this to my Megane 2.0 TCE180 along with external BOV. I got a little higher boots pressure after installing this. from 0,9 to 0,95-1,0 BAR.


 (10/10)  Submitted by: Phil 9-Apr-2016
K-Tec fitted the blanking plate recently and it has made a massive difference to the sound and boost release feel. The original factory fitted standard circulating valve wears out quickly. I already have K-Tec's Forge dump valve included T Samco pipe fitted., Definitely recommended for both sound and performance. I have 2006 R26 RS2 Cup.

Ask a question  Frequently asked questions about this item are shown below. Do you have a question?

Q: Do you get an installation manual with and can it be fitted yourself
A: Sorry no instructions are included as the plate simply replaces the existing recirc valve on the turbo using the standard 3 bolts.